ClearView Racing 5.8

$379.95

ClearView receiver for racers. Easier to use and better noise rejection.

In stock

Description

Overview:

The ClearView Racing receiver uses ClearView’s proprietary Digitally Enhanced Video Technology, specially tuned for the racing environment. These racing receiver features the legendary ClearView processing, while the OSD menu is simplified and streamlined for race day.

Signal rejection:

The racing receiver firmware is tuned to ignore interference like no other receiver. At indoor races, video receivers are faced with high interfering signal strength, lots of multipathing, and plenty of outside noise. ClearView has been tuned to see through as much interference as possible. The result? A stable clean picture that racers can rely on.

Streamlined Interface:

The menu system of the ClearView racing receiver is significantly streamlined. The spectrum analyzer is simplified to only occupy half the screen, and only the core features and options of ClearView were left. An additional mode called “Scan Mode” was also added to allow one-button frequency changes over up to eight favorite channels. Finally, the OSD can be limited to obstruct the least amount of screen

Features:

  • 8 saved channels
  • Completely custom channels
  • Precision Spectrum Analyzer
  • Enhanced noise rejection
  • Scan Mode
  • Auto NTSC/PAL
  • Minimalist OSD
  • Low ground station battery warning
  • Can update through FPC Port with FPC Cable (sold separately)

Comes with..

  • Power cable (wire leads)
  • 4-pin stereo jack to RCA
  • 1m Fatshark converter cable

Manual: ClearView Racing

Additional information

Weight .5 lbs
Dimensions 6 x 4 x 2 in

Specifications

Size: 4.75″ x 2.85″ x 0.75″ (120 x 72 x 19 mm)

Weight: 7oz (200g)

Input Voltage: 9-16.8VDC (3 cell or 4 cell LiPo)

Input Power: 3.6W

Frequency Range: 5655-5945 MHz

Channel Memory: 30 standard

MDS Sensitivity: -103 or better typ.

Video Standards: NTSC,PAL

AV Outputs: 2 ClearView with OSD + audio, 1 RAW legacy

Audio Output: System beeper for alarms, antenna switch, menu, and button clicks

Alarms: 3 RSSI levels, custom battery voltage

Update: Using Future-Proofing Cable and PC with internet