ClearView Racing 5.8 Scatch/Dent

**Refurb** ClearView receiver for racers. Easier to use and better noise rejection.


This item is scratch and dent. While fully passed through QC, it may contain scratches, dents, and dings/. The damage is purely cosmetic. Enjoy the lower price if looks don’t bother you!


The ClearView Racing receiver uses ClearView’s proprietary wireless technology while being specially tuned for the racing environment. The racing receiver features the legendary ClearView processing, while the OSD menu is simplified and streamlined for race day.

Signal rejection:

The racing receiver firmware is tuned to ignore interference like no other receiver. At indoor races, video receivers are faced with high signal strength, lots of multipathing, and plenty of outside noise. ClearView has been tuned to see through as much interference as possible. The result? A stable clean picture that racers can rely on.

Streamlined Interface:

The menu system of the ClearView racing receiver is significantly streamlined. The spectrum analyzer is simplified to only occupy half the screen, and only the core features and options of ClearView were left. An additional mode called “Scan Mode” was also added to allow one-button frequency changes over up to eight favorite channels. Finally, the OSD can be limited to obstruct the least amount of screen


  • 8 saved channels
  • Completely custom channels
  • Precision Spectrum Analyzer
  • Enhanced noise rejection
  • Scan Mode
  • Auto NTSC/PAL
  • Minimalist OSD
  • Low ground station battery warning
  • Can update through FPC Port with FPC Cable (sold separately)

Comes with..

  • Power cable (wire leads)
  • 2M Fatshark converter cable

From August 20th,2018 and onward, all ClearView Ground Stations will be shipped following the FatShark standard. If you use FatSharks or other compatible displays, you can now directly connect with any 3.5 to 3.5 mm male to male cable. To use other goggle pinouts, use your FatShark 3.5 mm to RCA cable, and then the supplied RCA cable your goggles come with – connecting the RCA to RCA with barrel connectors.

Manual: ClearView Racing

Additional information

Weight .5 lbs
Dimensions 6 × 4 × 2 in


Size: 4.75″ x 2.85″ x 0.75″ (120 x 72 x 19 mm)

Weight: 7oz (200g)

Input Voltage: 9-16.8VDC (3 cell or 4 cell LiPo)

Input Power: 3.6W

Frequency Range: 5655-5945 MHz

Channel Memory: 30 standard

MDS Sensitivity: -103 or better typ.

Video Standards: NTSC,PAL

AV Outputs: 2 ClearView with OSD + audio, 1 RAW legacy

Audio Output: System beeper for alarms, antenna switch, menu, and button clicks

Alarms: 3 RSSI levels, custom battery voltage

Update: Using Future-Proofing Cable and PC with internet